Dent Removal Repair Tool Kit

It actually worked, I used it on my Mercedes C-300 and I was given a quote of $2000 but here I am fixing it for $20. Definitely worth it for the price. I just wanna say that you have to be patient though, it's not gonna fix it the first time, it will take a few tries before you see a difference.

It works well, I would just add that you need to have patience and repeat the process for some dents multiple times. I had a ding/dent on the rear quarter panel of my truck. It was in an area where the metal was thicker (towards the top of the truck bed). After 5 applications/repeats of the process I was able to get it down to about 25% of what it originally was. I can probably remove it further and will do in another session.

Arrived on time. Good product with all the parts needed. It worked very well on one small dent but the really deep door ding did not come out. I will try again later on that one. It works as advertised though.

I used the kit to move a small dent that a parked car made by opening it's door into the side of my car. Since the dent was small I only used the smallest gaskets. I did many applications, while sipping my morning coffee. After a few trials the dent virtually disappeared. Maybe there was a learning curve, but in the end, I couldn't be happier. The small spray bottle came in handy. I used 70% isopropyl (rubbing) alcohol which I got from a drug store to remove the glue residues. Worked like a charm.

It works. Easy to use, once you find the applicable instruction set in a multi-product instruction fold-out. Bad dent in back door of car was first subject to the plunger/hot water treatment, which took most of the dent out; but it was still very noticeable. So I ordered this very inexpensive bridge puller, and now unless you know where to look closely, it is not noticeable at all . Very happy, easy to work with, especially when using channel lock pliers to rotate the dent pulling knob instead of my fingers. Glue comes off the car easily. Fingernail removes the glue from the tool with a little patience. Everything is provided except a little rubbing alcohol, for which they even supply a small spray bottle to use.

Got a new truck after 96 days of dealing with issues on the truck. After delivery I noticed a small depression about the size of a nickle with a north south very minimal crease effect. I did not want to bring it back to the dealer, so I figured I would make a small investment of cash and time to learn to do it myself, so that other dings in other things that might come along, I could fix easily as DIY guy. No instructions come with the product, though there are many videos up on YouTube to quickly get the gist of how to do it. I looked at 2 or 3 post order and was ready to go. I used the smallest oval in the bridge set, and the yellow glue stick. It comes with both black and yellow but no instruction on which one to use when. I had viewed a video where the black was used and the DIY owner there had a hard time getting the glue off of his hood, so I selected the yellow which I assume has a lower viscosity. Set the bridge in place once the glue had say 10 minutes of air time dry. Slowly cranked down on the adjusting screw on the bridge, then walked away, came back a few minutes later, another turn or two and again walked away and then heard the "pop" of the glue attached to the smallest oval pull away along with the bridge falling to the floor. Wow, easy and relatively quick. After try 1 I still could see a very very small remnant of the depression, so I did the application one last time with the same small oval and BLAM the depression is now gone. The glue came off of the truck with the "pop" still attached to the small oval, and was easy to peel off therefrom. Nice product, low cost and works well.

I had a bad dent on the hood of my car. It was left there by a massive branch that broke off of a tree during a bad thunderstorm. I've seen other similar products, and thought that this would be a great opportunity to try it out. My wife noticed that the black glue didn't seem to hold as well in 100° Farenheit, but the yellow was able to. As long as you follow the instructions and try to go from the outside in, this dent puller will do what it is supposed to do. I was able to get the dents out to the point that you can no longer notice it. There are still some tiny creases left behind from the dent, but this helped us remove the majority of the dent. This is a great product, and saved me hundreds of dollars!

I purchased this with intentions of using it to pull some dents from a scratch and dent refrigerator that I purchased. I worked just as designed and although it was my first attempt at dent repair both my wife and I are very pleased with the results. It did take a number of tries on each dent as I expected but the refrig, looks much better! I'll probably give a try on the car door dings next. works great!

Someone opened a heavy door into the curve of my front passenger fender on my 2004 Jaguar x type. It stood out whenever I looked on the side of the car. I purchased this dent-less paint remover not expecting very much. Within 4-5 pulls I got the majority of the dent out. I then proceeded to remove 2 other small dents from careless people in parking lots. I am more than satisfied with this tool. It could use better instructions.

Works as expected (if you follow instructions). Nothing has broken, the glue held fairly well, and I was able to pull some dents. You won't be able to pull door dings out completely with a kit like this, as the door dings in a car are typically too small and focused, however you should be able to lessen the ding by a bit using the smallest puller in this kit. Easily worth the price I paid, and I'll keep the kit for future use as well.